Accredited Health, Safety & Industrial Training in Ghana
Enterprise workforce safety competence, internationally recognized qualifications (IOSH, OTHM, CPD), and specialized construction and mining masterclasses. Delivered across Accra, Takoradi, and on-site mineral concessions.
Bridging International Standards with Ghana Statutory Compliance
Kevron Group empowers Ghanaian industries with rigorous, competency-based occupational safety education. We harmonize globally benchmarked awarding bodies (IOSH, OTHM, CPD) with the statutory requirements of the Ghana Factories, Offices and Shops Act (Act 328), Minerals Commission Health & Safety Regulations (L.I. 2182), and the National Building Code (GS 1207:2018).
Chartered Tutors
Instructors are CMIOSH and seasoned West African extractive industry engineers.
Hands-On Simulations
Practical harness donning, scaffolding tags, and simulated excavation shoring.
Multi-Modal Formats
Choose classroom, live virtual, on-site concession, or self-paced VLE/CBT.
Enterprise Batches
Tailored corporate training designed for 5 to 500+ site operatives.
Approved Ghana Courses & Competence Tracks
Browse accredited qualifications and high-risk operational safety masterclasses.
Construction Site Safety Management
Comprehensive operational safety governance for major capital civil engineering, commercial building, and industrial plant erection proje...
Working at Height Safety
Technical and practical height safety competencies, fall protection equipment inspection, harness donning, anchor systems, and emergency ...
Scaffolding Safety and Inspection
Comprehensive tubular and system scaffolding inspection, load calculation, foundation stability, scaffold tagging systems, tie patterns, ...
Excavation and Trenching Safety
Soil mechanics classification, trench collapse prevention, shoring, shielding, sloping protocols, underground utility locating, and hazar...
Construction Risk Assessment and Accident Prevention
Method Statement & Risk Assessment (RAMS) authoring, hazard identification techniques (HAZID/FMEA), Hierarchy of Controls, and proactive ...
No Courses Match Your Filter
Try adjusting your keyword or reset filters to view all available Ghana programmes.
Tailored Training Pathways by Ghana Industry Sector
Targeted competencies built around specific operating hazards, site conditions, and statutory inspectorate priorities.
Mining & Extraction
Surface pits, underground shafts, processing mills, and tailings storage across Tarkwa, Obuasi, and Ahafo.
- Hazard Identification & JSA
- Heavy Plant Traffic Safety
- L.I. 2182 Statutory Alignment
Civil Construction
High-rise towers, civil highways, drainage channels, and commercial estates across Greater Accra and Kumasi.
- Scaffolding & Fall Arrest
- Trenching & Shoring
- GS 1207:2018 Code Compliance
Oil & Gas Logistics
Offshore support vessels, Takoradi supply base, tank farms, and petroleum downstream storage facilities.
- Permit-to-Work (PTW) Mastery
- Confined Space Entry & Gas
- Emergency Response Systems
Manufacturing & Plants
Heavy fabrication plants, cement milling, agro-processing, and consumer FMCG manufacturing in the Tema corridor.
- Machinery Guarding & LOTO
- Chemical Storage & COSHH
- Factories Inspectorate Prep
Four High-Impact Delivery Formats Across Ghana
Choose the modality that aligns with operational shift schedules, remote site logistics, and learning outcomes.
Accra Executive Centre
Airport Residential Area. State-of-the-art multimedia presentation suites, catered executive amenities, and collaborative break-out sessions.
Takoradi Training Yard
Harbour Commercial Area. Dedicated outdoor practical testing rigs for Working at Height harness lines and Scaffolding erection inspections.
On-Site Mine Concession
Chartered instructors deployed directly to your remote operational concession or civil work camp, eliminating workforce transit downtime.
Live Online & VLE
Live tutor-led virtual sessions combined with 24/7 Kevron LMS self-paced study modules and online practice quizzes.
Upcoming Scheduled Ghana Cohorts
All schedules render strictly in Ghana Local Time: Africa/Accra (GMT / UTC+0 with zero seasonal DST shift).
| Programme Title | Dates & Time (Africa/Accra) | Location & Delivery Mode | Availability & Seats | Enquiry Action |
|---|---|---|---|---|
| Construction Site Safety Management Flagship Programme 01 |
18 Nov – 21 Nov 2026
08:30 – 16:30 GMT (Accra)
|
Accra Executive Training Centre
Classroom Format
|
Available (11 seats left) | Enquire Seats |
| Working at Height Safety Flagship Programme 02 |
25 Nov – 26 Nov 2026
08:30 – 16:30 GMT (Accra)
|
Takoradi Industrial Yard & Practical Rig
Classroom Format
|
Available (8 seats left) | Enquire Seats |
| Scaffolding Safety and Inspection Flagship Programme 03 |
02 Dec – 04 Dec 2026
08:30 – 16:30 GMT (Accra)
|
Takoradi Industrial Yard & Practical Rig
Classroom Format
|
Available (9 seats left) | Enquire Seats |
| Excavation and Trenching Safety Flagship Programme 04 |
09 Dec – 10 Dec 2026
08:30 – 16:30 GMT (Accra)
|
Accra Executive Training Centre
Classroom Format
|
Available (10 seats left) | Enquire Seats |
| Construction Risk Assessment and Accident Prevention Flagship Programme 05 |
15 Dec – 17 Dec 2026
09:00 – 15:30 GMT (Accra)
|
Virtual Live Classroom (Zoom / Teams)
Vle Format
|
Available (13 seats left) | Enquire Seats |
Five Construction Safety Programmes Matrix
Compare learning outcomes, competence levels, practical components, and awarding bodies to select the right track for your workforce.
| Evaluation Parameter |
Flagship Programme 01
Construction Site Safety Management
|
Flagship Programme 02
Working at Height Safety
|
Flagship Programme 03
Scaffolding Safety and Inspection
|
Flagship Programme 04
Excavation and Trenching Safety
|
Flagship Programme 05
Construction Risk Assessment and Accident Prevention
|
|---|---|---|---|---|---|
| Duration & Contact Hours | 4 Days (32 Hours) | 2 Days (16 Hours) | 3 Days (24 Hours) | 2 Days (16 Hours) | 3 Days (24 Hours) |
| Competence Level | Management & Supervisory | Competent Person / Operative | Inspector / Supervisory & User | Competent Person / Supervisory | Intermediate / Practitioner |
| Primary Target Roles | Project Managers, Resident Engineers, Site HSE Managers, Principal Contractors, Civil Works Supervisors | Scaffolders, Steel Erectors, Roofing Contractors, Tower Riggers, Facility Maintenance Engineers, HSE Supervisors | Scaffold Erectors, Site Supervisors, Structural Inspectors, Safety Officers, Maintenance Teams | Earthmoving Contractors, Pipe Layers, Trenching Crews, Geotechnical Technicians, Site Engineers | Site Supervisors, Risk Engineers, Project HSE Leads, Section Heads, Construction Subcontractor Managers |
| Practical Rig Assessment | Live site inspection simulation, Construction Phase Plan drafting exercise, contractor permit-to-work audit workshop, and statutory incident reporting simulations. | Hands-on full-body harness pre-use inspection, 100% tie-off twin-lanyard anchor transfer drills, vertical lifeline connection, and emergency suspension trauma rescue simulation. | Erection inspection of independent tied scaffold, base-plate leveling on uneven terrain, tie-pattern verification, and Scafftag handover signoff audit. | Visual soil manual classification tests (ribbon/thumb penetration), aluminum hydraulic shoring installation simulation, and optical gas detector calibration drill. | Authoring a comprehensive Job Safety Analysis (JSA) for live tower crane lifting, dynamic risk assessment workshop, and root cause investigation drill. |
| Ghana Regulatory Scope | Ghana Factories, Offices and Shops Act (Act 328), National Building Code (GS 1207:2018), Ministry of Roads and Highways Standard Specifications. | Work at Height Regulations, OSHA 1926 Subpart M, Ghana Mining General Regulations (L.I. 2182). | BS EN 12811-1 Temporary Works Standards, Ghana Factories Act Scaffold Provisions, TG20:21 Guidelines. | OSHA 1926 Subpart P, UK CIRIA C97 Excavation Guidelines, Ghana Minerals Commission Surface Mining Safe Practice. | ISO 45001:2018 Clause 6.1.2, Ghana Environmental Protection Agency Regulations, Minerals Commission Guidelines. |
| Awarding Body Alignment | ABIOSH (Awarding Body of International Occupational Safety and Health) | EOSH UK | EOSH UK | Kevron Certified Competence / EOSH UK Aligned | EOSH UK |
| Available Delivery Modes | Executive Classroom (Accra), In-Company Site Concession, Virtual Live | Practical Rig Centre (Accra/Takoradi), On-Site Client Facility | Classroom & Yard Inspection Rig (Takoradi / Accra), Client Yard | Classroom & Ground Trench Demonstration, On-Site Mine/Civil Site | Virtual Classroom, Executive Classroom (Accra), In-Company |
Corporate Workforce Safety Planner
Managing training across multiple engineering sites, mining concessions, or subcontracting teams? Use our interactive corporate planner to configure delegate headcounts, custom modules, on-site logistics, and consolidated corporate invoicing in Ghanaian Cedis (GHS).
Volume Discounting
Corporate discounts apply automatically for cohorts of 10+ delegates from the same operating company.
Controlled Simulations & Certified Field Safety Rigs
Safety competence cannot be acquired from slides alone. Kevron training incorporates mandatory physical demonstrations, simulated hazard conditions, and real equipment inspection drills supervised by certified safety auditors.
Mandatory Delegate PPE Requirements
Delegates attending practical training at the Takoradi Yard or on-site client facilities must wear verified standard PPE:
| Equipment | Standard Specification | Mandatory Scope |
|---|---|---|
| Safety Helmet | EN 397 / EN 12492 (4-pt chinstrap) | All practical & site sessions |
| Safety Footwear | EN ISO 20345 S3 (Steel toe/midsole) | All field sessions |
| High-Visibility Vest | EN ISO 20471 Class 2 | All outdoor exercises |
| Eye Protection | EN 166 Grade 1F | Simulated cutting / grinding |
Cryptographically Verifiable Digital Credentials
Kevron Group issues tamper-proof digital certificates equipped with unique validation hashes and QR codes, enabling site inspectors and HR managers to verify credentials instantly.
Instant QR Verification
Every issued certificate features a scannable QR code resolving directly to Kevron's official digital registry.
Multinational Employer Trust
Recognized by tier-1 mining operators, energy joint ventures, and international civil engineering contractors.
Continuing Professional Dev (CPD)
Delegates earn verifiable CPD hours and recognized certificates of competence to advance their careers.
The Four-Step Kevron Training Process
From corporate intake to assessment and credential issuance, here is how our training delivery operates.
Select & Enquire
Choose your accredited course or submit an enterprise workforce training plan with desired headcounts and dates.
Confirm & Prepare
Receive joining instructions, pre-course reading, PPE checklist, and digital venue or virtual classroom access links.
Interactive Delivery
Engage in tutor-led lectures, hazard identification workshops, practical rig exercises, and dynamic risk simulations.
Assess & Certify
Complete formal knowledge tests and practical competency signoffs to receive your verifiable digital certificate.
Shared Kevron Learning Ecosystem
Enrolled learners in Ghana enjoy seamless access to Kevron's global learning management systems and enterprise tools.
Kevron VLE
Virtual Learning EnvironmentAccess lecture recordings, downloadable study modules, interactive discussion boards, and assignment submission portals.
Access VLE Portal →Kevron CBT
Computer-Based TrainingSelf-paced micro-learning modules, compliance refreshers, and practice quizzes accessible on desktop, tablet, and mobile.
Launch CBT Platform →Corporate Portal
Enterprise DashboardHR and Safety Managers can monitor company-wide training completion rates, download attendance records, and retrieve invoices.
Client Login →Training Resources & Technical Syllabi
Download official curriculum overviews and Ghana occupational safety briefing cards.
Frequently Asked Training Questions
Answers to common queries regarding accreditations, corporate bookings, venue locations, and payment in Ghanaian Cedis.
Are Kevron Group training certificates recognized in Ghana and internationally?
Can you deliver private training on-site at our mining concession or construction camp?
How do corporate payments and invoicing work for Ghanaian companies?
What time zone are online virtual training sessions conducted in?
How can an employer verify a certificate presented by an employee?
Build a Safer, More Competent Operational Workforce in Ghana
Whether you need certified individual places in upcoming Accra cohorts or a tailored workforce training programme at your operating concession, our technical advisors are ready to support your safety goals.
Compare Construction & Safety Courses
Comparative Course Matrix
Ghana Extractive & Construction Safety Curriculum Breakdown
Loading syllabus comparative data...
| Criterion |
|
|---|---|
| Accreditation / Body | |
| Course Duration | |
| Delivery Options |
|
| Target Audience | |
| Prerequisites | |
| Assessment & Practice | |
| Consultation | Request Scope |