Skip to main content
Flagship Competence Hub 🇬🇭

Construction Safety Competence Programmes Ghana

Five specialized, high-risk operational safety qualifications designed specifically for Ghanaian civil engineering works, commercial building contractors, mining infrastructure, and capital project duty holders.

Explore 5 Programmes Corporate Workforce Planner All Ghana Training
Ghana Act 328 & GS 1207:2018 Aligned
Practical Rig Yards (Takoradi & Accra)
Africa/Accra Timetable (UTC+0)
Statutory Imperative

Operational Safety Governance in Ghanaian Construction

The acceleration of major capital infrastructure in Ghana—including flyovers, port logistics basins, commercial towers, and industrial plant erection—demands verified, standardized worker competence. Under the Factories, Offices and Shops Act (Act 328) and the Ghana National Building Code (GS 1207:2018 Part 10), principal contractors and subcontractors bear statutory legal duties to safeguard site personnel, enforce temporary works inspections, and prevent catastrophic falls and structural collapses.

Kevron's five flagship programmes provide the exact technical qualifications, hazard control mechanisms, and practical site inspection protocols required by the Department of Factories Inspectorate (DFI) and the Ministry of Roads and Highways.

Statutory Compliance Scope

  • Factories Act (Act 328): Mandatory scaffold registers, crane lift permits, and accident notifications.
  • GS 1207:2018 (Building Code): Section 10 provisions for edge protection, structural shoring, and public safety.
  • Minerals Commission L.I. 2182: High-risk surface mining civil work and excavation slope stability standards.
Approved Offerings

Five Flagship Construction Safety Programmes

Curated, comprehensive curricula addressing the highest fatality risk categories in Ghana's construction sector.

Construction Site Safety Management
Flagship Programme 01
4 Days (32 Hours)
Management & Supervisory Awarding Body: ABIOSH (Awarding Body of International Occupational Safety and Health)

Construction Site Safety Management

Comprehensive operational safety governance for major capital civil engineering, commercial building, and industrial plant erection projects across Ghana.

Target Audience: Project Managers, Resident Engineers, Site HSE Managers, Principal Contractors, Civil Works Supervisors
Practical Simulation: Live site inspection simulation, Construction Phase Plan drafting exercise, contractor permit-to-work audit workshop, and statutory incident reporting simulations.
Mandatory PPE: Standard 4-point PPE: Hard hat (EN 397), safety glasses (EN 166), high-visibility vest (EN ISO 20471 Class 2), steel-toe safety boots (EN ISO 20345 S3).
Regulatory Alignment: Ghana Factories, Offices and Shops Act (Act 328), National Building Code (GS 1207:2018), Ministry of Roads and Highways Standard Specifications.
Key Competency Outcomes:
  • Formulate, implement, and enforce statutory Site Health & Safety Plans (SHSP) aligned with Ghana Factories Inspectorate requirements.
  • Establish contractor HSE pre-qualification protocols, daily task risk assessments, and high-risk permit-to-work (PTW) coordination routines.
Available in: Executive Classroom (Accra), In-Company Site Concession, Virtual Live
Detailed Syllabus → Request Quote
Working at Height Safety
Flagship Programme 02
2 Days (16 Hours)
Competent Person / Operative Awarding Body: EOSH UK

Working at Height Safety

Technical and practical height safety competencies, fall protection equipment inspection, harness donning, anchor systems, and emergency suspension trauma prevention.

Target Audience: Scaffolders, Steel Erectors, Roofing Contractors, Tower Riggers, Facility Maintenance Engineers, HSE Supervisors
Practical Simulation: Hands-on full-body harness pre-use inspection, 100% tie-off twin-lanyard anchor transfer drills, vertical lifeline connection, and emergency suspension trauma rescue simulation.
Mandatory PPE: 5-point full body fall arrest harness (EN 361), shock-absorbing twin lanyards (EN 355), work positioning belt (EN 358), climbing helmet with 4-point chinstrap (EN 12492), gloves, safety boots.
Regulatory Alignment: Work at Height Regulations, OSHA 1926 Subpart M, Ghana Mining General Regulations (L.I. 2182).
Key Competency Outcomes:
  • Systematically inspect, don, adjust, and maintain Personal Fall Protection Systems (PFPS) in accordance with manufacturer and EN/ANSI standards.
  • Identify and implement collective fall protection barriers (guardrails, toe-boards, safety netting) prior to relying on personal fall arrest.
Available in: Practical Rig Centre (Accra/Takoradi), On-Site Client Facility
Detailed Syllabus → Request Quote
Scaffolding Safety and Inspection
Flagship Programme 03
3 Days (24 Hours)
Inspector / Supervisory & User Awarding Body: EOSH UK

Scaffolding Safety and Inspection

Comprehensive tubular and system scaffolding inspection, load calculation, foundation stability, scaffold tagging systems, tie patterns, and handover certification.

Target Audience: Scaffold Erectors, Site Supervisors, Structural Inspectors, Safety Officers, Maintenance Teams
Practical Simulation: Erection inspection of independent tied scaffold, base-plate leveling on uneven terrain, tie-pattern verification, and Scafftag handover signoff audit.
Mandatory PPE: Safety helmet with chinstrap, scaffold spanner holster with tether, 5-point harness with scaffold hooks (EN 362), anti-impact gloves, safety boots.
Regulatory Alignment: BS EN 12811-1 Temporary Works Standards, Ghana Factories Act Scaffold Provisions, TG20:21 Guidelines.
Key Competency Outcomes:
  • Conduct rigorous 7-day statutory scaffold inspections and post-weather event verification audits.
  • Verify structural scaffold components including standards, ledgers, transoms, braces, couplers, and base plates against engineering drawings.
Available in: Classroom & Yard Inspection Rig (Takoradi / Accra), Client Yard
Detailed Syllabus → Request Quote
Excavation and Trenching Safety
Flagship Programme 04
2 Days (16 Hours)
Competent Person / Supervisory Awarding Body: Kevron Certified Competence / EOSH UK Aligned

Excavation and Trenching Safety

Soil mechanics classification, trench collapse prevention, shoring, shielding, sloping protocols, underground utility locating, and hazardous atmosphere testing.

Target Audience: Earthmoving Contractors, Pipe Layers, Trenching Crews, Geotechnical Technicians, Site Engineers
Practical Simulation: Visual soil manual classification tests (ribbon/thumb penetration), aluminum hydraulic shoring installation simulation, and optical gas detector calibration drill.
Mandatory PPE: High-visibility vest (Class 3), safety helmet, cut-resistant safety gloves, waterproof safety boots with steel midsole puncture resistance, multi-gas detector for trench entry.
Regulatory Alignment: OSHA 1926 Subpart P, UK CIRIA C97 Excavation Guidelines, Ghana Minerals Commission Surface Mining Safe Practice.
Key Competency Outcomes:
  • Classify soil types (Type A, B, C) using calibrated visual and manual field test methods.
  • Design and verify protective support systems (sloping, benching, aluminum hydraulic shoring, trench boxes).
Available in: Classroom & Ground Trench Demonstration, On-Site Mine/Civil Site
Detailed Syllabus → Request Quote
Construction Risk Assessment and Accident Prevention
Flagship Programme 05
3 Days (24 Hours)
Intermediate / Practitioner Awarding Body: EOSH UK

Construction Risk Assessment and Accident Prevention

Method Statement & Risk Assessment (RAMS) authoring, hazard identification techniques (HAZID/FMEA), Hierarchy of Controls, and proactive accident prevention analytics.

Target Audience: Site Supervisors, Risk Engineers, Project HSE Leads, Section Heads, Construction Subcontractor Managers
Practical Simulation: Authoring a comprehensive Job Safety Analysis (JSA) for live tower crane lifting, dynamic risk assessment workshop, and root cause investigation drill.
Mandatory PPE: Site visitor 3-point PPE during live site walk (Hard hat, safety glasses, hi-vis vest).
Regulatory Alignment: ISO 45001:2018 Clause 6.1.2, Ghana Environmental Protection Agency Regulations, Minerals Commission Guidelines.
Key Competency Outcomes:
  • Apply quantitative and qualitative 5x5 risk matrices to evaluate civil engineering and industrial construction hazards.
  • Author robust Risk Assessment & Method Statements (RAMS) and Job Safety Analyses (JSA) accepted by international project sponsors.
Available in: Virtual Classroom, Executive Classroom (Accra), In-Company
Detailed Syllabus → Request Quote
Programmes Matrix

Five Construction Safety Programmes Comparison

A comprehensive side-by-side evaluation of durations, competence levels, practical components, and statutory scopes.

Criteria
Flagship Programme 01
Construction Site Safety Management
Flagship Programme 02
Working at Height Safety
Flagship Programme 03
Scaffolding Safety and Inspection
Flagship Programme 04
Excavation and Trenching Safety
Flagship Programme 05
Construction Risk Assessment and Accident Prevention
Duration & Contact Hours 4 Days (32 Hours) 2 Days (16 Hours) 3 Days (24 Hours) 2 Days (16 Hours) 3 Days (24 Hours)
Competence Level Management & Supervisory Competent Person / Operative Inspector / Supervisory & User Competent Person / Supervisory Intermediate / Practitioner
Primary Target Roles Project Managers, Resident Engineers, Site HSE Managers, Principal Contractors, Civil Works Supervisors Scaffolders, Steel Erectors, Roofing Contractors, Tower Riggers, Facility Maintenance Engineers, HSE Supervisors Scaffold Erectors, Site Supervisors, Structural Inspectors, Safety Officers, Maintenance Teams Earthmoving Contractors, Pipe Layers, Trenching Crews, Geotechnical Technicians, Site Engineers Site Supervisors, Risk Engineers, Project HSE Leads, Section Heads, Construction Subcontractor Managers
Practical Rig Assessment Live site inspection simulation, Construction Phase Plan drafting exercise, contractor permit-to-work audit workshop, and statutory incident reporting simulations. Hands-on full-body harness pre-use inspection, 100% tie-off twin-lanyard anchor transfer drills, vertical lifeline connection, and emergency suspension trauma rescue simulation. Erection inspection of independent tied scaffold, base-plate leveling on uneven terrain, tie-pattern verification, and Scafftag handover signoff audit. Visual soil manual classification tests (ribbon/thumb penetration), aluminum hydraulic shoring installation simulation, and optical gas detector calibration drill. Authoring a comprehensive Job Safety Analysis (JSA) for live tower crane lifting, dynamic risk assessment workshop, and root cause investigation drill.
Ghana Regulatory Scope Ghana Factories, Offices and Shops Act (Act 328), National Building Code (GS 1207:2018), Ministry of Roads and Highways Standard Specifications. Work at Height Regulations, OSHA 1926 Subpart M, Ghana Mining General Regulations (L.I. 2182). BS EN 12811-1 Temporary Works Standards, Ghana Factories Act Scaffold Provisions, TG20:21 Guidelines. OSHA 1926 Subpart P, UK CIRIA C97 Excavation Guidelines, Ghana Minerals Commission Surface Mining Safe Practice. ISO 45001:2018 Clause 6.1.2, Ghana Environmental Protection Agency Regulations, Minerals Commission Guidelines.
Awarding Body Alignment ABIOSH (Awarding Body of International Occupational Safety and Health) EOSH UK EOSH UK Kevron Certified Competence / EOSH UK Aligned EOSH UK
Available Delivery Modes Executive Classroom (Accra), In-Company Site Concession, Virtual Live Practical Rig Centre (Accra/Takoradi), On-Site Client Facility Classroom & Yard Inspection Rig (Takoradi / Accra), Client Yard Classroom & Ground Trench Demonstration, On-Site Mine/Civil Site Virtual Classroom, Executive Classroom (Accra), In-Company
Role Allocation

Mapping Programmes to Project Duty Holders

Assign the right training programme to each role in your engineering project structure.

Tier 1: Leadership

Project Managers & Resident Engineers

Statutory duty holders accountable for site safety plans, contractor coordination, and inspectorate liaison.

Recommended Track: Construction Site Safety Management (Prog 01)
Tier 2: High-Risk Specialist

Scaffolders, Erectors & Riggers

Workers exposed directly to elevated structures, tubular system assembly, and fall arrest deployment.

Recommended Tracks: Working at Height (Prog 02) & Scaffolding Inspection (Prog 03)
Tier 3: Ground & Substructure

Earthmoving & Trenching Crews

Supervisors and machine operators working in deep foundations, pipeline trenches, and underground utilities.

Recommended Track: Excavation & Trenching Safety (Prog 04)
Syllabus Deep-Dive

Curriculum & Topic Explorer

Inspect the five modular learning topics for each construction safety programme.

Construction Site Safety Management

Duration: 4 Days (32 Hours) | Level: Management & Supervisory
Module 01

Statutory Frameworks & Principal Contractor Duties

Act 328 compliance, legal liability, GS 1207:2018 provisions, client & contractor statutory boundaries.

Module 02

Pre-Construction Information & Phase Health Plans

Authoring practical Construction Phase Plans, site logistics, welfare facilities, hazardous zone segregation.

Module 03

High-Risk Construction Operations & Permit Systems

Hot work, lifting operations, confined spaces, temporary electrical installations, and simultaneous operations.

Module 04

Subcontractor Prequalification & Site Coordination

Evaluating subcontractor safety competence, enforcing daily site rules, disciplinary protocols, and joint reviews.

Module 05

Incident Investigation, Root Cause & Statutory Filings

Evidence preservation, witness interviewing, TapRooT/5-Whys methodology, and reporting to statutory authorities.

Field Testing

Certified Simulation Rigs & Practical Drills

Safety competence cannot be certified by written exams alone. Delegates must demonstrate physical aptitude and procedural rigor in controlled, hazard-simulated environments.

Harness Donning & Suspension Syncope Drill Every delegate dons a full-body harness, executes anchor transfers, and participates in timed suspension trauma relief drills.
Scafftag Inspection & Tag Signoff Physical inspection of sole plates, screw jacks, bracing, and ties on our outdoor rig, culminating in an authenticated Scafftag status signoff.
Soil Classification & Trench Shoring Box Setup Manual soil ribbon tests, moisture evaluation, and simulated aluminum hydraulic shoring installation following OSHA 1926 Subpart P tables.

Assessment Integrity Gate

Delegates are assessed against strict criteria before certificates of competence are issued:

  • Minimum 80% score on statutory knowledge examination.
  • 100% flawless score on critical safety checks (harness pre-use inspection, 100% tie-off).
  • Completion of an applied site risk assessment or inspection checklist.
Zero Tolerance Policy: A failure on any critical life-safety checkpoint results in immediate remediation prior to credential signoff.
Logistics Flexibility

Flexible Training Venues Across Ghana

Delivered at our dedicated facilities or mobilized directly to your active project site.

Accra Training Suite

Airport Residential Area. Ideal for management, site engineers, and risk officers participating in classroom masterclasses.

Takoradi Practical Yard

Harbour Commercial Area. Designed for hands-on scaffolding erection, fall arrest lines, and industrial rigging simulations.

On-Site Project Concession

Deployed nationwide to your remote civil camp or mine concession with mobile training equipment and chartered instructors.

Verified Schedule

Upcoming Construction Cohorts

Local time: Africa/Accra (GMT / UTC+0 with zero seasonal DST shift).

Programme Dates & Time (Africa/Accra) Location Seat Status Action
Construction Site Safety Management Flagship Programme 01
18 Nov – 21 Nov 2026
08:30 – 16:30 GMT (Accra)
Accra Executive Training Centre
Airport Residential Area, Accra
 Available (11 seats left) Enquire
Working at Height Safety Flagship Programme 02
25 Nov – 26 Nov 2026
08:30 – 16:30 GMT (Accra)
Takoradi Industrial Yard & Practical Rig
Harbour Commercial Area, Takoradi
 Available (8 seats left) Enquire
Scaffolding Safety and Inspection Flagship Programme 03
02 Dec – 04 Dec 2026
08:30 – 16:30 GMT (Accra)
Takoradi Industrial Yard & Practical Rig
Harbour Commercial Area, Takoradi
 Available (9 seats left) Enquire
Excavation and Trenching Safety Flagship Programme 04
09 Dec – 10 Dec 2026
08:30 – 16:30 GMT (Accra)
Accra Executive Training Centre
Airport Residential Area, Accra
 Available (10 seats left) Enquire
Construction Risk Assessment and Accident Prevention Flagship Programme 05
15 Dec – 17 Dec 2026
09:00 – 15:30 GMT (Accra)
Virtual Live Classroom (Zoom / Teams)
Kevron Digital Academy Live Studio
 Available (13 seats left) Enquire
Selection Guide

How to Choose the Right Construction Safety Track

A structured decision matrix to match your team's operational risk profile with the proper qualification.

Decision Factor 1

Site Seniority

If leading overall project governance and managing subcontractors, select Programme 01: Site Safety Management.

Decision Factor 2

Elevation Risk

If personnel work above 2 metres or on temporary structures, prioritize Programme 02 (Height) and Programme 03 (Scaffold).

Decision Factor 3

Subsurface Hazards

If operating earthmoving plant or entering trenches over 1.2m depth, select Programme 04: Excavation Safety.

Decision Factor 4

Risk Planning

If authoring method statements (RAMS) or managing incident closeouts, select Programme 05: Risk Assessment.

Workforce Scale

Corporate Contractor Safety Packages

Do you need to upskill an entire subcontractor workforce of 20 to 200+ site operatives? We provide custom on-site induction pipelines, bilingual delivery where needed, and unified corporate invoicing in Ghanaian Cedis (GHS).

Launch Corporate Training Planner

Tender HSE Prequalification

Meet stringent client health and safety criteria for international construction tenders in Ghana.

Ecosystem Integration

Related Ghana Consultancy & Technical Resources

Complement workforce training with professional safety audits and engineering advisory.

Safety & Health Management

Statutory compliance audits, site safety plans, and competent person support for major contractors.

Explore Consultancy →

Extractive Industry HSE

Civil engineering and structural safety governance within mining concessions and plant facilities.

Explore Extractive HSE →

Civil Infrastructure Sector

Integrated engineering safety management for roads, bridges, commercial developments, and utilities.

Explore Sector →
Technical FAQs

Construction Safety Training Clarifications

Key details regarding practical prerequisites, weather contingencies, and certification validity.

What are the physical prerequisites for the Working at Height and Scaffolding courses?
Delegates must be medically fit to climb and free from conditions such as vertigo, severe epilepsy, or heart conditions. Prior to physical tower climbing drills, delegates complete a medical self-declaration and undergo a blood pressure pre-check.
What happens if severe weather occurs during outdoor practical rig training in Takoradi?
In accordance with safety protocols, practical outdoor climbing and scaffolding work is suspended during heavy tropical downpours or high wind events. Theory, equipment inspection, and risk assessment modules are rotated forward in our covered classrooms until safe rig conditions resume.
How long are Kevron construction safety certificates valid?
Certificates of Competence for high-risk programmes (Working at Height, Scaffolding Inspection, Excavation Safety) are valid for 2 or 3 years depending on the awarding body standard. Refresher training is recommended thereafter to ensure compliance with updated statutory guidelines.
Zero Compromise on Site Safety

Equip Your Ghanaian Site Teams with Accredited Safety Competence

Contact our technical team in Accra or Takoradi to discuss cohort bookings, tailored on-site delivery, or corporate volume rates.

Request Construction Cohort Quote Corporate Training Configurator Speak with an Advisor
// Update panel visibility tabPanels.forEach(panel => { if (panel.id === targetId) { panel.classList.remove('hidden'); panel.classList.add('block'); } else { panel.classList.remove('block'); panel.classList.add('hidden'); } }); if (window.lucide && typeof window.lucide.createIcons === 'function') { window.lucide.createIcons(); } }); }); // Initialize Lucide icons on load if (window.lucide && typeof window.lucide.createIcons === 'function') { window.lucide.createIcons(); } });

Compare Construction & Safety Courses

Ready to Elevate Your Organisation's Safety Assurance in Ghana?

Speak directly with our senior safety consultants about L.I. 2182 compliance, mining risk profiling, tailings environmental safety, or accredited workforce competence.

Request a Ghana Proposal Contact Accra Office
Request Ghana Quote